1.75mm/2.85mm Filament 3D PLA Launin ruwan hoda
| Alamar kasuwanci | Torwell |
| Kayan Aiki | Tsarin PLA na yau da kullun (NatureWorks 4032D / Total-Corbion LX575) |
| diamita | 1.75mm/2.85mm/3.0mm |
| Cikakken nauyi | Kg 1/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Cikakken nauyi | 1.2Kg/spool |
| Haƙuri | ± 0.02mm |
| Muhalli na Ajiya | Busasshe kuma mai iska |
| Saitin Busarwa | 55˚C na tsawon awanni 6 |
| Kayan tallafi | A shafa a Torwell HIPS, Torwell PVA |
| Amincewa da Takaddun Shaida | CE, MSDS, Reach, FDA, TUV da SGS |
| Mai dacewa da | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker da duk wani firintocin FDM 3D. |
| Kunshin | 1kg/spool; 8spools/ctn ko 10spools/ctnjakar filastik da aka rufe da kayan bushewa |
Ƙarin Launuka
Launi Akwai:
| Launin asali | Fari, Baƙi, Ja, Shuɗi, Rawaya, Kore, Yanayi, |
| Wani launi | Azurfa, Toka, Fata, Zinariya, Ruwan hoda, Shuɗi, Lemu, Zinariya-rawaya, Itace, Koren Kirsimeti, Shuɗin Galaxy, Shuɗin Sama, Mai Gaskiya |
| Jerin haske mai haske | Ja mai haske, Rawaya mai haske, Kore mai haske, Shuɗi mai haske |
| Jerin haske | Kore Mai Haske, Shuɗi Mai Haske |
| Jerin canza launi | Shuɗin kore zuwa kore mai launin shuɗi, shuɗi zuwa fari, shunayya zuwa ruwan hoda, launin toka zuwa fari |
| Karɓi Launi na PMS na Abokin Ciniki | |
Nunin Samfura
Kunshin
1kg na birgimaFilament 3D PLAtare da maganin kashe ƙura a cikin kunshin allurar rigakafi.
Kowace akwati a cikin akwati ɗaya (akwatin Torwell, Akwatin Neutral, ko Akwatin da aka keɓance).
Akwatuna 8 a kowace kwali (girman kwali 44x44x19cm).
Me yasa ake siyan sa daga Torwell?
Fa'idodinmu:
1. Babu kumfa, inganci mai kyau don tallafawa cikakkiyar sakamakon bugawa.
2. Farashin jimla daga masana'anta, tallafawa aikin OEM
3. Ƙarin zaɓin launi, isa har zuwa launuka 30, kuma akwai launi na musamman
4. Ingantaccen aiki kafin hidima da bayan hidima
Komai yawan odar ku, muna bayar da irin wannan sabis ɗin
Da zarar ka zama abokin hulɗarmu, za mu tallafa wa tallanka, gami da hotunan samfura
Za a sake duba duk wani abu kafin a kawo shi. Injiniyoyin fasaha za su kasance a yanar gizo don tallafawa idan akwai buƙata.
Mun girma tare da dukkan abokan cinikinmu tare.
5. Isar da kaya cikin sauri, samfurin ko ƙaramin oda cikin kwana 1-2, babban oda ko OEM kwanaki 5-7.
6. Shin kamfanin ku yana da gidan yanar gizon?
A: Eh, muna da gidajen yanar gizo guda biyu: www.3dtorwell.com da www.torwell3d.com
Nasihu kan Bugawa
1. Kafin ko bayan amfani, muna ba da shawarar ku saka ƙarshen filament ɗin a cikin ƙaramin ramin da ke gefen spool ɗin don guje wa haɗuwa. Da fatan za a gyara shi ta amfani da abin yanka gefe kafin a ciyar da filament ɗin a cikin extrude ɗin, ko da ba a karye ba, lanƙwasa filament ɗin zai haifar da tsatsa ko rashin inganci.
2. Idan ba za ka buga ba na 'yan kwanaki masu zuwa, don Allah ka ja zaren don kare bututun firintar.
3. Tsaftacewa da zare na gogewa ko canza bututun ƙarfe kafin bugawa hanya ce mai inganci don rage cunkoso.
4. Idan mannewar layin farko ba ta da kyau, za ka iya gwadawa:
1). A sake daidaita abin da aka buga don rage tazara tsakanin bututun ƙarfe da allon.
2). Amfani da tef ɗin 3M/tef ɗin rufe fuska/manne na iya taimakawa filament ɗin ya manne a kan panel ɗin sosai.
3). A ƙara zafin gadon daidai gwargwado.
5. Kayan aiki daban-daban da firinta daban-daban za su sami yanayi daban-daban da suka dace. Da fatan za a duba kunshinmu. Ko kuma a aiko mana da imel don ƙarin tallafin fasaha.
| Yawan yawa | 1.24 g/cm3 |
| Ma'aunin Gudun Narkewa (g/minti 10) | 3.5(190℃/2.16kg） |
| Zafin Zafi Narkewa | 53℃, 0.45MPa |
| Ƙarfin Taurin Kai | 72 MPa |
| Ƙarawa a Hutu | 11.8% |
| Ƙarfin Lankwasawa | 90 MPa |
| Nau'in Lankwasa | 1915 MPa |
| Ƙarfin Tasirin IZOD | 5.4kJ/㎡ |
| Dorewa | 4/10 |
| Bugawa | 9/10 |
| Zafin Fitar da Kaya (℃) | 190 – 220℃An ba da shawarar 215℃ |
| Zafin gado (℃) | 25 – 60°C |
| Girman bututun ƙarfe | ≥0.4mm |
| Gudun Fanka | A kan 100% |
| Saurin Bugawa | 40 – 100mm/s |
| Gado mai zafi | Zaɓi |
| Shawarar Gina Fuskokin Ginawa | Gilashi mai manne, Takardar rufe fuska, Tef mai shuɗi, BuilTak, PEI |
