Filament na Torwell PLA 3D mai ƙarfi mai ƙarfi, Ba ya tangle, 1.75mm 2.85mm 1kg
Fasallolin Samfura
| Brand | TOrwell |
| Kayan Aiki | Tsarin PLA na yau da kullun (NatureWorks 4032D / Total-Corbion LX575) |
| diamita | 1.75mm/2.85mm/3.0mm |
| Cikakken nauyi | Kg 1/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Cikakken nauyi | 1.2Kg/spool |
| Haƙuri | ± 0.02mm |
| Muhalli na Ajiya | Busasshe kuma mai iska |
| Saitin Busarwa | 55˚C na tsawon awanni 6 |
| Kayan tallafi | Yi amfani daTOrwell HIPS, Torwell PVA |
| Amincewa da Takaddun Shaida | CE, MSDS, Reach, FDA, TUV da SGS |
| Mai dacewa da | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker da duk wani firintocin FDM 3D |
| Kunshin | 1kg/spool; 8spools/ctn ko 10spools/ctn jakar filastik da aka rufe da kayan bushewa |
Ƙarin Launuka
Launi Akwai:
| Launin asali | Fari, Baƙi, Ja, Shuɗi, Rawaya, Kore, Yanayi, |
| Wani launi | Azurfa, Toka, Fata, Zinariya, Ruwan hoda, Shuɗi, Lemu, Zinariya-rawaya, Itace, Koren Kirsimeti, Shuɗin Galaxy, Shuɗin Sama, Mai Gaskiya |
| Jerin haske mai haske | Ja mai haske, Rawaya mai haske, Kore mai haske, Shuɗi mai haske |
| Jerin haske | Kore Mai Haske, Shuɗi Mai Haske |
| Jerin canza launi | Shuɗin kore zuwa kore mai launin shuɗi, shuɗi zuwa fari, shunayya zuwa ruwan hoda, launin toka zuwa fari |
| Karɓi Launi na PMS na Abokin Ciniki | |
Nunin Samfura
Kunshin
Cibiyar Masana'antu
Tambayoyin da ake yawan yi akai-akai
A: An yi kayan ne da kayan aiki masu sarrafa kansu, kuma injin yana kunna wayar ta atomatik. Gabaɗaya, ba za a sami matsala ba.
A: Za a gasa kayanmu kafin a samar da su don hana samuwar kumfa.
A: diamita na waya shine 1.75mm da 3mm, akwai launuka 15, kuma ana iya yin keɓance launukan da kuke so idan akwai babban tsari.
A: Za mu sarrafa kayan aikin don sanya kayan da ke cikin danshi, sannan mu sanya su a cikin akwatin kwali don kare su daga lalacewa yayin jigilar kaya.
A: Muna amfani da kayan aiki masu inganci don sarrafawa da samarwa, ba ma amfani da kayan da aka sake yin amfani da su, kayan bututun ƙarfe da kayan aiki na biyu, kuma ingancin yana da tabbas.
A: Ee, muna kasuwanci a kowane lungu na duniya, da fatan za a tuntuɓe mu don cikakkun kuɗin isarwa.
| Yawan yawa | 1.24 g/cm3 |
| Ma'aunin Gudun Narkewa (g/minti 10) | 3.5(190℃/2.16kg） |
| Zafin Zafi Narkewa | 53℃, 0.45MPa |
| Ƙarfin Taurin Kai | 72 MPa |
| Ƙarawa a Hutu | Kashi 11.8% |
| Ƙarfin Lankwasawa | 90 MPa |
| Nau'in Lankwasa | 1915 MPa |
| Ƙarfin Tasirin IZOD | 5.4kJ/㎡ |
| Dorewa | 4/10 |
| Bugawa | 9/10 |
| Zafin Fitar da Kaya (℃) | 190 – 220℃An ba da shawarar 215℃ |
| Zafin gado (℃) | 25 – 60°C |
| Girman bututun ƙarfe | ≥0.4mm |
| Gudun Fanka | A kan 100% |
| Saurin Bugawa | 40 – 100mm/s |
| Gado mai zafi | Zaɓi |
| Shawarar Gina Fuskokin Ginawa | Gilashi mai manne, Takardar rufe fuska, Tef mai shuɗi, BuilTak, PEI |
